82ES15 82 Volt Gen II Edger (Tool Only)
All day performance – Over 3 miles of edging on a single charge!
- Cutting Depth: 2.2”
- Motor: Direct Drive commercial grade brushless motor produces up to 1.5kW of power
- Blade: 8” Heat-treated blade
- Trigger: Easy to use 2-step switch
- Edge Capacity: Up to 3 miles on a single charge
|Take the edge off even the biggest jobsite by combining 50% more power with over 3 miles of use per charge!|
|Powerfully Reliable. This 82V straight shaft edger has high power and torque for an outstanding edging performance in even the toughest conditions.
Designed for the Pros. Better operator position and easy to use two-step switch for comfort and safety allows the operator to carry out maintenance of larger properties without runtime constraints.
Optimized Ergonomics. Easy to maneuver design, 8” blade and 7000 RPM handles large jobs in little time!
Zero gas smell. Zero pull cords. Zero pollution breathed. Zero time wasted.
|Brushless Motor – Direct Drive brushless motor generates blade speeds of up to 7,000 RPM, 45% faster than the previous model|
|Commercial grade motor also produces up to 50% more power than a 25cc gas trimmer|
|Easy to use two-step switch and over-molded adjustable front handle with large gripping area for maximum comfort when in use|
|All day performance – Over 3 miles of edging on a single charge|
|Durability – High strength magnesium guard and shaft to withstand anything the job throws its way|
|Easy to set over-sized rear wheel for blade depth adjustment of up to 2.2”|
|Front mount straight shaft with rear mount battery housing for a balanced weight at 11.5lbs.|
|The No List|
|No Fumes. You no longer have to smell like gas after edging|
|No Emissions. Save money and breathe clean air|
|Low Maintenance. No mixing fuels, no messy spills|
|Low Noise. Easy on the ear, low-decibel operation|
|Warranty + Service|
|2-year tool limited warranty|
|Dedicated Support 1-855-470-4267|
|Dealer Support (see Dealer Locator for details)|
String Trimmer FAQS
Why doesn’t my string trimmer turn on?
Battery operated string trimmer: Check that the battery has enough charge. Make sure to use a fully charged battery when starting your chores. Also, ensure the battery pack is installed and secured in the unit. If the battery is loose or can easily be removed it is not fully secured. A fully secured battery should have some resistance when pulled. Corded string trimmers: Use the guide inside the owner’s manual to ensure you have the correct extension cord required for operation. Check that the extension cords are in good working condition and make sure they are fully connected on both ends. If it still won't turn on, follow the start guide instructions that are located inside the owner’s manual.
How do I advance line?
Auto-feed string trimmers: To advance line, simply squeeze and release the trigger and repeat. Each time you start and stop the unit approximately ¼ inch of trimmer line will release. The more often you do this, the more line will advance. Bump and Feed string trimmers: While the unit is spinning, gently tap the bottom of the unit (knob) on the ground and the string trimmer will release approximately ¼ inch of line each time you tap it. The more often you do this, the more line will be released.
How do I clean my string trimmer?
To reduce yard debris build up on your string trimmer, do the following: • Wipe the machine after each use with a damp cloth dipped in water or neutral detergent. • Do not use aggressive detergents or solvents to clean the plastic parts or handles. • Keep the trimmer head free of grass, leaves, or excessive grease. • Keep the air vents clean and free of debris to avoid overheating and damage to the motor or battery. • Do not spray water onto the motor and electrical components.
Why does my unit stop when cutting grass?
Check the following if your unit suddenly stops cutting during use: • The guard is not on the unit. Ensure the guard is attached for each use. • The line is too heavy. Make sure you’re using the correct cutting line for your unit. Refer to the specification for the correct diameter of line that should be used with your string trimmer unit. • The motor is overloaded. Make sure that the cutting path (length of line outside of the trimmer head) is no more than the maximum cutting width of your unit. • The battery may be too warm. Allow it to cool and try again. Remove the battery from the unit and take it indoors to a cool/dry shaded location. Leave for 10 minutes, then try again once the the battery cools. • The battery pack may require charging or may not be properly installed.
Why isn’t my string trimmer cutting well?
Check that the guard is cleared of debris. Built up debris on the underside of the guard may prevent the line from cutting at its full potential. Ensure the cutting blade located on the underside of the guard is exposed, clean, and clear of debris. If the blade is dull, sharpen or replace the cutting blade. This will allow your trimmer line to work more effectively.